Original decals that you designate to salvage will be carefully papered & masked prior to paint removal & cleaned & clearcoated after final paint coat has dried-

All moving parts & mechanical windings will be cleaned & lubricated-

Wooden parts will be stripped, filled as necessary, primed, sanded & painted or stained to match original finish as close as possible-

Leather, vinyl, cloth, rubber or other similar materials that will be salvaged will be cleaned & dressed as required-

Inner wired solid rubber tires will be removed from rims, cleaned, dressed & re-attached to rims-

Sanding, buffing & polishing of respectable trim pieces to be salvaged- i.e.- stainless steel, aluminum, brass, copper, etc.-

Decent/salvageable graphics related to tin litho are cleaned & waxed or clearcoated (your choice)-

Bad original cloth wrapped wiring (depending on gauge) will be matched as close as possible & replaced with new same-

Hand painting of raised, extruded or stamped metal letters, numbers & symbols-

Simple airbrushing-

Sanding & filling of major pitting-

Cleaning & polishing of scratched/dull plastic lenses-

Application of special paints like hammertone, wrinkle & granite-

Riveted parts will be drilled out & replaced with new rivets, pop rivets or driveless head bolts-